Climbing Training

Training Equipment

Our range of climbing training products are suitable for all situations. Whether you are a climbing wall to looking expand your training range, you want to have and edge above your door, or a professional level training set-up at home FILTH have got you covered.

All FILTH training products are designed and tested by climbers, so you know it will live up to your rigorous training regime. Helping you keep climbing even when it’s wet outside and the walls are closed.

If you have questions about any of products please contact us.

FILTH Edge

The FILTH Edge is a simple and effective climbing training tool – with not one, not two, but THREE edges!

Hand-finished in beautiful tulip wood, it is designed to provide a simple symmetrical hand position which is wider than normal finger boards. The consistent edge also acts as a great option for off-set and staggered work where the training boards are on two planes.

A generous edge radius helps eliminate catching skin when training.

Top Edge: at 28mm this is a friendly, warm-up edge

Middle Edge: your standard 20mm (with radius) training edge

Bottom Edge: at a spicy 10mm (with radius) or 6mm(without radius), this edge is to be taken seriously!

Material: Tulip

Width: 600mm

Height: 70mm

FILTH Station

Our FILTH Station is a modular base station with 27 tee-nuts designed for mounting finger boards and climbing holds. It is made from 18mm FSC certified high quality birch plywood.

This version is designed to be mounted above a door frame, and includes screws for mounting into structural timber.

EXTRA WIDE: at 1200mm wide you get even more space to attach your training equipment

EXTRA DEEP: with 36mm risers, the Station sits away from the wall, allowing space for bolts and giving you space to train

EXTRA TEE-NUTS: 27 pre-fitted tee-nuts – a commercial grade density of quality screw-in tee-nuts

PILOT HOLES: Station comes with pre-drilled pilot holes to make mounting it to the wall really easy

Materials: High quality birch 18mm plywood – FSC Certified – BB/CP Furniture grade as a minimum.  Quality 2 screw, tee-nuts with M10 thread (standard climbing wall configuration). Tee-nuts and ply tested to meet climbing wall standard BS EN 12572-1

Width: 1200mm

Depth of Primary Board: 18mm

Height: 300mm

Depth of Station (including risers): 54mm

FILTH Station – Freestanding

A freestanding version of the FILTH Station – a mounting station for finger boards, climbing holds and training products – with a made to measure height, just for you.

Standard frame comes with one FILTH mounting board on the front face, but if you would like a stepped/off-set training face we can add a second board.

An extra board can go on the rear face to allow for a staggered training configuration (standard as shown), back to back with the front face, or just request the second board to be the same as the front – the set up is your choice!

The height of the frame is 2.3m as standard but as each frame is built to order, we are happy make it taller or shorter as you require. Please just let us know the required height when ordering.

This product will arrive in sections and require some assembly – all necessary screws are included – even the required bit! 

Please note this is a natural timber product which is hand built and finished. You may want to seal or paint the product to customise it, which is great!

Materials: High quality birch 18mm plywood – FSC Certified – BB/CP Furniture grade as a minimum.  Quality 2 screw, tee-nuts with M10 thread (standard climbing wall configuration). Tee-nuts and ply tested to meet climbing wall standard BS EN 12572-1

Station Width: 1200mm

Frame Width: 1.20m

Station Height: 300mm

Frame Depth: 1.10m

Standard Frame Height: 2.3m (can be increased – this height is for users up to about 6ft)

FILTH 45 – Freestanding Climbing Wall

The FILTH Freestanding Home Climbing Wall is the ultimate addition to your home climbing and training set up.

Built from high quality plywood and timber, choose from 45, 30 or 20 degrees for your own home climbing wall or training board. The standard size includes: 150mm vertical kicker, 3m height of climbing surface (2.4m wide) and finishes on a vertical 150mm head wall (for finishing holds).

The front cross beam also provides attachment points for finger stations, TRX systems and rings, and it may also be cladded to provide a vertical climbing surface, increasing the total climbing surface as an optional extra – please get in touch for a quote.

Standard assembled dimensions (can be adjusted – contact us to discuss).

Climbing Surface:

Height: 3m – plus 150mm Kicker and 166mm Header

Width: 2.4m @ 45 degrees

vertical height of structure: 2.58m @45Deg

width of structure: 2.76m

depth (footprint): minimum 3.1m @45Deg

Materials:

Panels: high quality birch 18mm plywood – FSC Certified – BB/BB Furniture grade as a minimum.  Quality 2 screw, tee-nuts with M10 thread (standard climbing wall configuration).

Frame – structural graded timber – hand finished where exposed

Tee nuts and ply tested to meet climbing wall standard BS EN 12572-2:2017

The panels come with an industrial protective coating to help with lifespan and aesthetics.